Installation Guide

Proper installation is key to ensuring that your Prime Water Alkaline Ionizer or Hydrogen Water Generator operates efficiently and provides you with the highest quality water. This guide will walk you through the installation process, making it easy to set up your system and start enjoying the benefits of clean, healthy water.

null

Pre-Installation Checklist

null
Water Source

Ensure that your water source has a Total Dissolved Solids (TDS) level between 100-200 ppm for optimal ionization. If necessary, use a pre-filter or RO system to adjust the TDS levels.

null
Space Requirements

Identify a suitable location near your kitchen sink or under the counter where the ionizer or generator can be securely installed. Ensure there is sufficient space for the unit & faucet.

null
Electrical Outlet

Ensure that there is a nearby electrical outlet to power your ionizer or generator, and verify that the outlet is properly grounded for safety. Additionally, make sure the outlet is easily accessible.

null

Installation Steps

Alkaline Ionizer

  • null
    Mounting the Unit
    • If installing on a countertop, place the ionizer on a stable, flat surface.
    • For under-the-counter installation, securely mount the ionizer using the provided brackets and screws.
  • null
    Connecting the Water Supply
    • Attach the inlet hose to the cold water supply valve.
    • Connect the other end of the inlet hose to the ionizer’s water input.
    • Ensure all connections are tight to prevent leaks.
  • null
    Installing the Smart SS Faucet
    • Drill a hole in the countertop if necessary, and mount the Smart SS Faucet.
    • Connect the faucet to the ionizer’s water output using the provided tubing.
    • Secure the connections and test the faucet to ensure proper water flow.
  • null
    Electrical Connection
    • Plug the ionizer into the grounded electrical outlet.
    • Turn on the unit and follow the initial setup instructions on the touch panel.
  • null
    Testing the System
    • Run water through the ionizer for several minutes to flush the system.
    • Test the pH and ORP levels using the display to ensure the ionizer is functioning correctly.

Hydrogen Water Generator

  • null
    Positioning the Unit
    • Place the generator on a stable surface close to your water source and electrical outlet.
  • null
    Connecting the Water Supply
    • Attach the inlet hose to your cold water supply and connect it to the generator’s water input.
    • Secure the connections to prevent any leaks.
  • null
    Setting Up the Output
    • Connect the output tubing to the generator and direct it to the desired dispensing point, such as a faucet or water dispenser.
  • null
    Electrical Connection
    • Plug the generator into the grounded electrical outlet.
    • Power on the unit and follow the on-screen setup instructions.
  • null
    Testing the System
    • Run water through the generator to flush the system.
    • Check the hydrogen concentration using the display or a hydrogen tester to confirm proper operation.
null

Post-Installation Tips

null
Check for Leaks

After installation, carefully inspect all connections and fittings for any signs of leakage or loose connections. Tighten connections if necessary.

null
Filter Maintenance

Make a note of when the filters were installed, and schedule regular checks or replacements as recommended in the user manual.

null
Initial Run

For the first use, allow the system to run for a few minutes to ensure that all components are functioning properly and the water quality meets your expectations.

null

Why Professional Installation?

While the installation of Prime Water systems is designed to be straightforward, we recommend professional installation to ensure optimal performance and to maintain the validity of your warranty. A professional installer will ensure that all components are correctly fitted, tested, and ready to provide you with the best possible water quality.

Open chat
Hi,
How can we help you?